No.
Part name
Procedure
Remarks
1
1
Fan motor and
cross flow fan
1.
Detachment
1)
Carry out work of item 1 of
⑥
and
item 1 of
⑩
.
2)
Remove the fan motor connector (CN210,
White,
7P) connected to the control P.C.
board
and then remove the lead wire from
the clamp.
3)
Loosen the fixing screw
(Ø5/32"(4mm) x
0.4"(10mm) 2 pcs.
)
of heat exchanger. (Fig. 21)
4)
Loosen the fixing screw
(Ø5/32"(4mm) x
0.4"(10mm) 2 pcs.)
of
cover motor
and then remove the
cover motor.
(Fig. 2
2
)
5)
Loosen the set screw of the cross flow fan
by
hexagonal wrench
. (Fig. 2
3
)
6)
Loosen the fixing screw (
Ø5/32"(4mm) x
0.4"(10mm) 2 pcs.)
of
fan motor band
and then remove the fan
motor and the cross
flow fan.(Fig. 2
4
)
2.
Atta
chment
1)
Check the type name of the fan motor.
2)
Keep connector position and arrange the fan
motor wire following
(
Fig.
2
5
)
(Fig.
2
1
)
Heat exchanger
Fixing screw
For ICF-340-30-6A
Cover motor
(Fi
g
. 22)
Hexagonal wrench
(Fi
g
. 23)
(Fi
g
. 24)
Fixing screw
3)
Install
the fan motor and the cross
flow fan
into the
original
position and then tighten
the
fixing
screw to the fan motor
band
.
4)
Keep distance between main unit and cross
flow fan as
(
Fig. 26
)
and then tighten set
screw to the original position.
(Fi
g
. 2
5
)
(Fi
g
. 2
6
)
5) Tighten the fixing screw to the cover motor.
6
) Tighten the fixing screw to the heat exchanger.
7
) Connect the fan motor connector (CN
210,
White, 7P
) to the control P.C. board and then
fix it as before with the clamp.
Motor band
Fan motor
Fan mot
o
r
Motor band
Fan moter motor wire
(45°)
Cross flow fan
Fan motor
Set screw
Main unit
0.2"(
5 mm
)
- 102 -
