Toshiba MMC-UP0151HP-E, Руководство по обслуживанию

Страница: 121 / 295

<RBC-ASCU11- >
Clearing a check code of the outdoor unit
Clear the currently detected outdoor unit for each refrigerant line to which the indoor unit
controlled by the remote controller is connected. (The indoor unit check code is not cleared.)
Use the service monitoring function of the remote controller.
1
Push the [menu] button for over 10 seconds.
2
Every pushing [ or ] buttons, the indoor unit numbers in group control are
displayed successively.
3
Push the [OFF timer] button to confirm the selected indoor unit.
4
Every pushing [ or ] buttons to set CODE No. to “
FF FF
FF FF FF
”
5
The display in A of the following figure counts down as follows at 5-second intervals:
“
0005 0005
0005 0005 0005
”
o o o o o
“
0004 0004
0004 0004 0004
”
o o o o o
“
0003 0003
0003 0003 0003
”
o o o o o
“
0002 0002
0002 0002 0002
”
o o o o o
“
0001 0001
0001 0001 0001
”
o o o o o
“
0000 0000
0000 0000 0000
”
The check code is cleared when “
000
” appears.
However, the display counts down from “
005
” again.
6
After you have finished checking, push the [ON/OFF] button to return to normal mode.
Clearing a check code of the indoor unit
Push the ON / OFF button on the remote controller.
(Only the check code of the indoor unit controlled by the remote controller will be cleared.)
1,2
4
2, 4 6 3 1
"Monitoring function"
display
Indoor unit
number
Data
- 121 -