Toshiba MMC-UP0151HP-E, Руководство по обслуживанию

Страница: 112 / 295

<Indoor unit address>
5
Push the TEMP. / buttons repeatedly to set the CODE No. to
13 13
13 13 13
.
6
Push the TIME / buttons repeatedly to set an indoor unit address.
7
Push the button.
(It is OK if the display turns on.)
<Group address>
8
Push the TEMP. / buttons repeatedly to set the CODE No. to
14 14 14 14 14
.
9
Push the TIME / buttons repeatedly to set a group address. If the indoor unit is
individual, set the address to
0000 0000 0000 0000 0000
; header unit,
0001 0001 0001 0001 0001
; follower unit,
0002 0002 0002 0002 0002
.
Individual : 0000
Header unit : 0001
Follower unit : 0002
10
Push the button.
(It is OK if the display turns on.)
11
Push the button.
The address setting is complete.
(
SETTING
flashes. You can control the unit after
SETTING
has disappeared.)
}
In case of group control
<RBC-ASCU11- >
2
3,4
3,4
3,4
6
2,5
1
Push and hold the [menu + ] buttons at same time for more than 10 seconds.
2
Push the [OFF timer] button to confirm the selected indoor unit.
<Line (system) address>
3
Push the [menu] button until the CODE No. flashes. And using the [ or ] buttons,
specify the CODE No.12.
4
Push the [menu] button until the SET DATA flashes. And using the [ or ] buttons, set
a system address.
5
Push the [OFF timer] button to confirm the SET DATA.
- 112 -