Toshiba MAGNIA 510D, Руководство пользователя

Страница: 27 / 185

Connecting Components
Installing optional devices
27
Chapter 2
Connecting Components
Installing optional devices
You should install all optional devices before setting up the server.
Before you start
❖
Before installing an optional device, read the manufacturer’s instructions and the
installation instructions in this manual.
❖
The procedures described in this chapter require specific technical knowledge and
experience. If you have no experience installing/removing optional devices, or if the
job seems difficult, consult your authorized service provider. Toshiba assumes no
liability for damages if you install and/or remove optional devices yourself.
Selecting a workplace
❖
Before performing server maintenance, select a place that does not have high
humidity and is as free of dust and direct sunlight as possible.
❖
The ambient temperature and humidity should range between 50°F to 95°F (10
°
C to
35
°
C) and 30% to 80% RH. Avoid exposing the server to sharp temperature
fluctuations that could cause condensation.
DANGER: Never handle any electrical component that is not described in this
manual. Some parts carry high voltages and are dangerous.To avoid electrical
shock, shut down the server and disconnect the power cable before performing any
server maintenance.
HINT: Toshiba recommends using Toshiba-certified devices or peripherals. Consult
your authorized service repair office, sales office, or log on to the Web site at
www.support.toshiba.com for recommended devices.