Toshiba E-STUDIO520 Скачать руководство пользователя страница 229

Страница: 229 / 592

March 2005 © TOSHIBA TEC

e-STUDIO520/600/720/850 ADJUSTMENT

3 - 29

3.5

Image Quality Adjustment (Scanning Function)

3.5.1

Density adjustment

Adjusts the center density and the variation of density adjustment button.

< Adjustment Mode (05) >

(1)

While pressing [0] and [5] simultaneously, turn the power ON.

(2)

Key in a code and press the [START] button.

(3)

Key in an adjustment value.
(To correct the keyed-in value, press the [CLEAR] button.)

(4)

Press the [ENTER] or [INTERRUPT] button to store the value. The equipment goes back to the
ready state.

(5)

Shut down (turn the power OFF), back ON, and then perform the scanning job.

(6)

If the desired image density has not been attained, repeat step (1) to (5).

Original mode

Item to be

adjusted

Remarks

Text/Photo

Photo

Text

Gray Scale

845

847

846

848

Manual density
mode center value

The larger the value is, the darker
the image becomes.
Acceptable values: 0 to 255

850

852

851

853

Manual density
mode light step
value

The larger the value is, the lighter
the light side becomes.
Acceptable values: 0 to 255

855

857

856

858

Manual density
mode dark step
value

The larger the value is, the darker
the dark side becomes.
Acceptable values: 0 to 255

860

862

861

863

Automatic density
mode

The larger the value is, the darker
the image becomes.
Acceptable values: 0 to 255

Содержание E-STUDIO520
















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание E-STUDIO520

Отзывы:

Toshiba E-STUDIO520, Руководство по обслуживанию, Страница: 229 / 592

Результаты поиска

Содержание E-STUDIO520

Отзывы: