Toshiba e-STUDIO A Series, Руководство оператора

Страница: 56 / 108

56 Using the IP Fax Function from the N/W-Fax Driver
0.
Using the IP Fax Function from the N/W-Fax Driver
The required settings for receiving/sending by an IP Fax and the basic procedure for sending are as follows.

P.56 “Sending IP Faxes”

P.60 “Specifying Recipients of IP Faxes”

P.68 “Removing recipients”

P.69 “Setting up the [Send] tab”

P.72 “Setting up the [Device Settings] tab”
There are three types of sending methods.

IP Fax Direct — Sends an IP Fax directly to the MFP supporting the IP Fax function.

IP Fax Gateway — Select this to send an IP Fax to a G3 Fax machine via a T.38 supporting gateway.

IP Fax SIP — Sends an IP Fax to the MFP supporting the IP Fax function via a SIP server.

The IP Fax function requires an IP Fax options. For details, contact your service technician or service representative.

To send a fax by an IP Fax, enable [IP Fax Function] in the [Device Settings] tab.

P.72 “Setting up the [Device Settings] tab”

IP Fax direct transmission is possible only when a recipient is selected from the address book of the AddressBook
Viewer.

P.61 “Selecting recipients from the address book”

Sending IP Faxes
This section describes the basic procedures to send an IP Fax.

P.58 “When password entry is required”

P.59 “When LDAP authentication is enabled”
1
Start the application software and prepare the document to be sent.
2
Select [Print] from the [File] menu in the application software.
The procedure for displaying the [Print] dialog box may differ from the above depending on the application
software.
3 Select [TOSHIBA e-STUDIO Fax] for the printer and click [Preferences].
The dialog box of the N/W-Fax driver properties appears.
Note that the command name to open the driver properties may differ from [Preferences] depending on the
application software.