Toshiba E-studio 281c, Руководство по печати

Страница: 353 / 382

Printing from an Application 351
Page Length
The number of lines to print on a page can be specified with the following option.
As this equipment is a page printer we cannot change the physical length of a piece of paper so
the actual effect of this command is to change the value for lines per inch so that the requested
number of lines is printed on the page. The actual page length may differ from this value if the
top margin or the text length option is used.
If this option is not specified the PJL command will not be sent so the printer’s default value will
be used. The minimum page length allowable is 5. If value is less than 5 page length is set to 5.
The command to specify 66 lines per page is “lp -o pl=66
filename ”.
Color Mode
The color mode print mode can be selected using the following options.
Example: The command to set the color mode for the print job is
“lp -o colormode=COLOR
filename ”
Pure Black and Pure Gray
The pure black and pure gray mode can be selected using the following options.
Example: The command to set the pure black and pure gray mode for the print job is
“lp -o pureblackgray=1
filename ”
Option Value
Alternate
Value
Description
pl=value Set the lines per page to value.
Option Value
Alternate
Value
Description
colormode=
COLOR color Set the color mode printing for the print mode.
colormode=
GRAYSCALE grayscale Set the grayscale mode printing for the print mode.
Option Value
Alternate
Value
Description
pureblackgray=0 Disable the pure black and pure gray mode.
pureblackgray=1 Enable the pure black and pure gray mode.