Toshiba E-studio 281c, Руководство по печати

Страница: 278 / 382

5 Printing from Windows
276 Printing with Extended Print Functionality
Printing Color Document in Gray scale
This equipment can print in color as well as black and white.
The printer driver automatically detects whether the document uses only color or only black and
white, and it prints the document accordingly.
Additionally, you can select black and white mode manually to print a color document in gray
scale to reduce the print cost and consumption of color toners.
Printing a color document in gray scale
1
Display the Basic tab and select “Black and White” at the “Color”
drop down menu.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
y The print job is printed in gray scale.
Stapling and Hole Punching
You can staple and punch the paper.
y
Stapling is not available if a finisher is not installed.
y
Hole Punching is not available if a hole punch unit is not installed.
Stapling the paper
1
Display the Finishing tab and check the “Staple” check box. Then
select how to staple.
Upper Left — Select this to staple the printed document in the upper left.
Upper Right — Select this to staple the printed document in the upper right.
Center Top — Select this to staple the printed document double along the top edge.
Middle Left — Select this to staple the printed document double along the left side.
Center Double — Select this to fold and staple the printed document double in the
center.
y The selectable options vary depending on the paper size.
y “Center Double” can be selected only when the Saddle Stitch Finisher is installed and
configured on the Configuration tab.