Toshiba e-studio 151, Руководство по обслуживанию

Страница: 114 / 176

e-STUDIO162/162D/151/151D USER PROGRAM 12 - 3
2. Selecting a setting for a user program
1) Press the [MENU] key and then press the [OK (ENTER)] key.
In printer mode, the user programs are accessed by simply press-
ing the [MENU] key.
2) Press the [<] key [v
]
or [
>
] key [
^]
to select the item that you wish to
configure in the USER PROGRAM items, and then press the [OK
(ENTER)] key.
• You can also select a program by directly entering the program
number with the numeric keys.
3) Press the [
<
] key [v] or [
>
] key [^] to change the setting of the
selected item.
NOTE:
• If you mistakenly select the wrong item, press the [CLEAR] key [C]
and repeat the procedure from step 2).
• To cancel a setting for a user program, press the [MENU] key.
4) Press the [OK (ENTER)] key.
Your selection appears briefly and then the previous screen
appears.
NOTE:
When "AE LEVEL ADJUST" is selected in the user programs and the
[OK (ENTER)] key is pressed, the automatic exposure adjustment
screen appears. Adjust the exposure and press the [OK (ENTER)] key.
(e-STUDIO151/151D) (e-STUDIO162/162D)
(e-STUDIO151/151D) (e-STUDIO162/162D)
(e-STUDIO151/151D) (e-STUDIO162/162D)
1 1 2
2 2
2 1 1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
MAIN MENU
1:USER PROGRAM
MAIN MENU
1:USER PROGRAM
1 1 2
2 2
2 1 1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
USER PROGRAM
2:PREHEAT MODE
USER PROGRAM
2:PREHEAT MODE
1 1 2
2 2
2 1 1
1,2,3,
1,2,3,
SP. FUNC
AUTO
ZOOM
OK
PREHEAT MODE
1:30 SEC.
PREHEAT MODE
1:30 SEC.
Audible signals (key entry beep, invalid key beep, base setting
beep)
The machine sounds three different types of beep signals: a key
entry beep that sounds when a valid key is pressed, an invalid key
beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting
(base settings are explained below). The base setting beep is initially
disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals
or disable them, see "KEY TOUCH SOUND".
The beep patterns of each type of beep signal are as follows:
Key entry beep: One beep
Invalid key beep: Two beeps Base setting beep: Three beeps
Base settings
The base settings are preset standard selections for each copy set-
ting. The base settings are as follows:
Copy ratio: 100%
Light and Dark level: center Paper feed location:
Tray 1 (Upper paper tray)
AUTO/TEXT/PHOTO: AUTO
e-STUDIO162_151.book 3 ページ ２００４年１２月２日 木曜日 午後９時３７分