4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33031
(Revision Date: Mar. 1, 2017)
4.5 Wireless LAN BOARD (B-EX700-WLAN2-QM-R)
4-33
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
In accordance with 47 CFR Part15.407 (e) U-NII devices operating in 5.15-5.25GHz frequency bands are
restricted to indoor operations only.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be
installed and operated with at least 20cm and more between the radiator and person’s body (excluding
extremities: hands, wrists, feet and legs).
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website www.hc-sc.gc.ca/rpb
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
For safety
Do not use this product in locations where use may be forbidden, for example, in an aeroplane or a hospital. If
you do not know the forbidden areas, please refer to and follow the airline company or medical institution
guidelines.
Flight instrument or medical equipment may be affected, causing a serious accident.
Since this product uses extremely low power compared with mobile phones, it cannot possibly interfere the
pacemakers and defibrillators. However, if the use of this product should be likely to have affected the
pacemaker or defibrillator, immediately stop using the product and contact your TOSHIBA TEC sales agent.
Do not disassemble, modify, or repair the product. Doing so may cause injury. Also, modification is against
the Laws and Regulations for Radio Equipment. Please ask your TOSHIBA TEC sales agent for repair.
Precaution in use
This product communicates with other devices by radio. Depending on the installation location, orientation,
environment, etc., its communication performance may deteriorate or devices installed near by may be
affected.
Keep away from a microwave.
Communication performance may deteriorate or a communication error may occur due to the radio emitted
from a microwave.
Since the wireless LAN use the same radio frequency band, each radio wave may interfere with each other
when they are used at the same time, causing a deterioration of communication performance or a
disconnection of network. If there is any problem with connection, please stop using wireless LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
TEC Wireless LAN Board Specification
Built-in IEEE802 Part 11b/g/n (802.11b/g/n)
Operating temperature: -40 to 85°C (No condensation)
Dimensions: 18.0 mm (W) x 25.0 mm (H) x 2.5 mm (D)
