Toshiba 20HLV86 - 20" LCD TV, Руководство по обслуживанию

Страница: 9 / 132

24
Adding channels to the TV/DVD’s memory
When you press CH
M M M M M
/
? ? ? ? ?
, your TV/DVD will stop only on the
channels you have stored in the TV/DVD’s channel memory. Follow the
steps below to program channels into the channel memory.
Programming channels automatically
Your TV/DVD can automatically detect all active channels and store
them in its memory. After the TV/DVD has stored the channels in its
memory automatically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press
▲
or
▼
until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
▼
until the CH PROGRAM selection is highlighted.
5. Press or to start channel programming. The TV/DVD will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV/DVD is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH
M M
M M M
/
? ?
? ? ?
to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using the Channel Number buttons.
2. Press MENU, then press or to display the SETUP menu.
3. Press
▲
or
▼
to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other channels
you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel
M M M M M
/
? ? ? ? ?
on the TV/DVD or CH
M M M M M
/
? ? ? ? ?
on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
Game mode
After connecting a TV Game to the unit, press GAME. The TV screen
changes to the Game mode.
• The Game mode screen is adjusted to the suitable brightness for
your eyes.
• If GAME is pressed during standby mode, the unit turns on
automatically and the Game mode screen appears on the screen.
S E T U P
L A N G U A G E
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E E N G L I S H
1 2 : 0 0 A M
T V /
C A B L E
A D D
: S E L E C T : A D J U S T
In addition to cycling through your
programmed channels, the CH
M
/
?
buttons will also cycle through the video
input sources (page 31) in the order
illustrated below.
PC
ANT (programmed channel) VIDEO1 VIDEO2
HDMI ColorStream HD GAME
MENU
CH
M M M M M ? ? ? ? ?
Channel
Numbers
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
12:00AM
CABLE
ADD / ERASE
:SELECT :ADJUST
Setting up
your TV/DVD
GAME
25
DVD Playback
Using the
TV/DVD’
s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
Using the TV/DVD’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons (0-9, 100).
3. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV/DVD will switch back and forth
between the two channels.
Programming your favorite channels
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
You can still use CH
M M M M M
/
? ? ? ? ?
to scan through all the channels you
programmed in the TV’s memory.
To program your favorite channels:
1. Select a channel you want to program.
2. Press MENU, then press or to display the OPTION menu.
3. Press
▲
or
▼
to highlight FAVORITE CH.
4. Press or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
5. Press or to highlight SET and press ENTER.
6. Press EXIT to return to normal viewing.
7. Repeat steps 1-6 for up to 12 channel.
To select your favorite channels:
Press the FAV
▲
/
▼
buttons on the remote control to select your
favorite channels.
The FAV
▲
/
▼
buttons will not work until you have programmed
your favorite channels.
To clear your favorite channels:
1. Select a channel you want to clear.
2. Press MENU, then press or to display the OPTION menu.
3. Press
▲
or
▼
to highlight FAVORITE CH.
4. Press or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
5. Press or to highlight CLEAR.
6. Press ENTER until “0” replaces the channel number you want to erase.
7. Press EXIT to return to normal viewing.
8. Repeat steps 1-7 for the other channels.
O P T I O N
O N T I M E R
FAVO R I T E C H
C H L A B E L
V I D E O L A B E L O F F
: S E L E C T : A D J U S T
F A V O R I T E C H : C H 0 0 2
S E T / C L E A R T V C A B L E
S E T U P C H
0 0 0 0
0 0 0 0
0 0 0 0
R E T U R N
: S E L E C T : A D J U S T
E N T E R : S E T
FAVORITE CH :CH002
SET / CLEAR TV CABLE
SETUP CH 002 0 0 0
0 0 0 0
0 0 0 0
RETURN
:SELECT :ADJUST
ENTER :CLEAR
MENU
EXIT
Channel
Numbers
FAV
CH
M M M M M ? ? ? ? ?
CH RTN
Using the
TV/DVD’
s Features
ENTER
26
Note:
If you forget your password, press DISPLAY
four times within five seconds while the TV/
DVD is in password entering mode. This
allows you to reset your password.
Using the LOCKS menu
Note : The V-Chip feature is available for the U.S. V-Chip system
only. The Canadian V-Chip Feature system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.
Selecting a password
Before you can use the V-Chip Feature to block programs and chan-
nels, you must select a password. The password you select prevents
others from changing the rating limits you set.
To select your password and access the LOCKS menu:
1. Press MENU, then press or to highlight the LOCKS menu.
2. Press
▲
or
▼
to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
4. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
If the wrong password is entered, “ERROR” blinks about 4
seconds.
5. You may now set up the LOCKS menu. See “Using the V-Chip
(parental control) feature” (page 27), “Locking channels” (page 28),
“Locking the video inputs” (page 28), “Setting the GameTimer
TM ”
(page 29) or “Using the panel lock feature” (page 29).
To change your password:
1. Press MENU, then press or to display the LOCKS menu.
2. Press
▲
or
▼
to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password.
Press ENTER. The LOCKS menu appears.
4. Press
▲
or
▼
to highlight NEW PASSWORD and press or to
display the NEW PASSWORD menu.
5. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
6. Enter the password again to confirm it, and then press ENTER.
7. Press EXIT to return to normal viewing.
L O C K S
N E W P A S S W O R D
S E L E C T : [ 0 - 9 ] E N T E R
E X I T
: S E T
: E N D
Note:
The password you programmed is also used in
the LOCKS menu; see pages 27-29.
L O C K S
N E W P A S S W O R D - - - -
S E L E C T : [ 0 - 9 ] E N T E R
E X I T
: S E T
: E N D
L O C K S
C O N F I R M P A S S W O R D
S E L E C T : [ 0 - 9 ] E N T E R
E X I T
: S E T
: E N D
ENTER
Channel
Numbers
DISPLAY
EXIT
Using the
TV/DVD’
s Features
MENU
27
DVD Playback
Using the
TV/DVD’
s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
Using the V-Chip (parental control) feature
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The TV and MOVIE ratings work with the V-Chip feature and allow
you to block programs according to the rating limits you set.
To use the V-Chip to block programs by rating:
1. Press MENU, then press or to
display the LOCKS menu.
2. Press
▲
or
▼
to display the
password entering mode.
3. Use the Channel Number buttons
(0-9) to enter your password.
Press ENTER. The LOCKS menu
appears.
4. Press
▲
or
▼
to highlight V-CHIP.
• Press or to highlight ON to
enable V-Chip program blocking
by rating.
• Press or to highlight OFF to
disable V-Chip program blocking by
rating.
5. Press
▲
or
▼
to highlight TV RATING. Then, press or to
display the desired rating.
OFF : TV RATING is not set
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG : Parental guidance
TV-14
: 14 years old and above
TV-MA : 17 years old and above
• When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to
explain the rating. Press
▲
or
▼
to select the desired rating you want.
Press or to select the setting “ON” or “OFF”, then press ENTER.
6. Press
▲
or
▼
to highlight MOVIE
RATING. Then, press or to
display the desired rating.
OFF : MOVIE RATING is not set
(no movies will be blocked)
G : All ages
PG : Parental guidance
PG-13 : Parental guidance less than
13 years old
R : Under 17 years old Parental guidance suggested
NC17 : 17 years old and above
X
: Adult only
7. When you are done selecting the ratings, press EXIT to return to
normal viewing.
When you try to view a program with a ratings block, a message will
appear listing the program’s ratings. The program can still be viewed if
you press MUTE and then enter your password to temporarily bypass
the block.
L O C K S
V - C H I P S E T
V - C H I P
T V R A T I N G
M O V I E R A T I N G
: S E L E C T : A D J U S T
O N / O F F
O F F
O F F
L O C K S
V - C H I P S E T
V - C H I P
T V R A T I N G
M O V I E R A T I N G
: S E L E C T : A D J U S T
O N
O F F
O F F
O F F / T V - Y / T V - Y 7 / T V - G
T V - P G / T V - 1 4 / T V - M A
L O C K S
V - C H I P S E T
V - C H I P
T V R A T I N G
M O V I E R A T I N G
: S E L E C T : A D J U S T
O N
T V - P G
O F F
O F F / G / P G / P G - 1 3 / R / N C 1 7 / X
MENU
EXIT
Channel
Numbers
Using the
TV/DVD’
s Features
ENTER
DISPLAY