C-1
SERVICE MODE LIST
This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control
for more than a the standard time in the appropriate condition. (See below chart.)
Releasing of V-CHIP PASSWORD.
Initialization of factory TV data.
NOTE: If you set factory initialization, the memories are reset such as
the channel setting, and the POWER ON total hours.
Initialization of factory DVD data.
Set Key
Operations
VOL. DOWN
(Minimum)
Remocon
Key
0
2 sec.
VOL. DOWN
(Minimum)
1
2 sec.
Standard
Time
VOL. DOWN
(Minimum)
4
2 sec.
Set
Condition
TV mode
DVD mode
(No disc)
TV mode
POWER ON total hours are displayed on the screen.
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
STOP
7
2 sec.
VOL. DOWN
(Minimum)
6
2 sec.
VOL. DOWN
(Minimum)
9
2 sec.
DVD mode
(No disc)
TV mode
ALL mode
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Releasing of PARENTAL LOCK.
Refer to the “PARENTAL CONTROL - RATING LEVEL”.
5
2 sec.
DVD Write mode.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
VOL. DOWN
(Minimum)
DVD mode
(No disc)
Check of the SUM DATA and MICON VERSION on the screen.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
VOL. DOWN
(Minimum)
2 sec.
TV mode
8
D
V
D
Region setting.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
STOP
1
2 sec.
DVD mode
(No disc)
Method
Press the following remocon keys
continuously.
SETUP SUBTITLE 3
AUDIO 0
The disk cannot be taken out.
Refer to the “TRAY LOCK”.