Toro ProCore 1298, Руководство оператора

Страница: 2 / 32

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This product complies with all relevant European directives.
For details, please see the separate product specific
Declaration of Conformity (DOC) sheet.
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
Figure 1 and Figure 2 identify the location
of the model and serial numbers on the product. Write the
numbers in the space provided.
g007327
Figure 1
Model 09716
1. Model and serial number location
g028644
Figure 2
Model 09715
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (
Figure 3 ),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
g000502
Figure 3
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
General Safety......................................................... 3
Safe Operating Practices........................................... 3
Safety and Instructional Decals ................................. 5
Setup ............................................................................ 8
1 Inspecting the Machine.......................................... 9
2 Connecting the Lower Link Arms............................ 9
3 Connecting the Upper Link ...................................10
4 Connecting the PTO Shaft ....................................11
5 Adjusting the Sway Links ......................................12
6 Leveling the Aerator Side-to-Side ...........................13
7 Adjusting the Roller Scraper ..................................13
8 Installing the Tine Heads and the Tines ...................13
9 Installing the Turf Guards .....................................14
10 Securing the Hood Latches (CE only) ....................14
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved