Toro ProCore 1298, Руководство оператора

Страница: 8 / 32

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Inspect the machine.
2
Lynch pin 2 Connect the lower link arms.
Link pin 1
3
Lynch pin 1
Connect the upper link.
Bolt (1/2 x 3 inches) 1
Nut (1/2 inch) 1
4
Short driveshaft, Part 115-2839 (may be
needed; sold separately)
–
Connect the PTO shaft.
5
No parts required
–
Adjust the sway links.
6
No parts required
–
Level the aerator side-to-side.
7
No parts required
–
Adjust the roller scraper.
8
No parts required
–
Install the tine heads and the tines.
9
Turf guards (not included)
–
Install the turf guards.
10
CE Compliance Kit, Part 110-4693 (not
included)
1
Secure the hood latches (required for
CE only).
Lynch pin (ProCore 864) 4
11
Lynch pin (ProCore 1298) 8
Remove the storage stands.
8