Toro ProCore 1298, Руководство оператора

Страница: 29 / 32

g007323
Figure 43
Removing the Aerator from
the Tractor
1. Park the vehicle on a level surface, not on a slope.
2. Disengage the PTO and engage the parking brake.
3. Shut off the engine and remove the key from the
ignition switch.
4. Before leaving the operator's seat, wait for the engine
and all moving parts to stop.
5. Install the storage stands and secure them to the aerator
with the lynch pins (
Figure 44 ).
g007302
Figure 44
1. Lynch pins 2. Storage stand
Note:
The aerator can be stored on the original
shipping pallet.
6. Slowly lower the aerator until the storage stands contact
the ground.
7. Loosen the locking nut and rotate the upper adjusting
link to release the tension between the aerator and the
tractor.
8. Remove the lynch pin and the top link pin securing the
center link to the bracket. Retain the lynch pin and the
top link pin with the aerator.
9. Disconnect the safety shield chains from the tractor
PTO (CE only).
10. Pull back on the lock collar to disconnect the power
shaft from the tractor PTO shaft.
11. Slide the PTO shaft back and remove it from the
tractor.
12. Connect the PTO tether to the PTO shield to prevent
the PTO shaft from contacting the ground (
Figure 45 ).
29