Toro ProCore 1298, Руководство оператора

Страница: 19 / 32

Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Adjusting the Aeration Depth
CAUTION
Adjust the aeration depth only when the tractor is
parked, the parking brake is engaged, the engine is
off and the PTO is disengaged.
1. Lay the desired tine onto the depth decal while aligning
the tine tip with the desired aeration depth as shown
in
Figure 23 .
decal106-8856
Figure 23
2. Determine the letter setting aligned with the mounting
end of the tine (
Figure 23 ). Adjust the depth control to
the corresponding letter on the decal.
3. Insert a 9/16-inch socket with a ratchet onto the depth
adjuster input shaft (
Figure 24 ).
g007304
Figure 24
1. Depth adjuster input shaft 3. Depth indicator decal
2. Locking plate 4. Depth alignment mark
4. Push in on the socket or use your hand to press on
the locking plate.
5. Rotate the depth adjuster clockwise to reduce the
aeration depth or counterclockwise to increase the
aeration depth. (
Figure 24 ).
6. Rotate the depth adjuster input shaft until the desired
depth is attained as shown on the depth indicator decal
(
Figure 24 ).
Note:
17 revolutions of the depth adjuster input shaft
equals approximately 6.4 mm (1/4 inch) depth change.
Understanding the Tractor
Controls
It is necessary to familiarize yourself with the operation of
the following tractor controls before you are able to operate
the aerator:
•
PTO engagement
•
3 point hitch (raise/lower)
•
Clutch
•
Throttle
•
Gear selection
•
Parking brake
Note:
Refer to tractor Operator's Manual for operating
instructions.
19