Toro ProCore 1298, Руководство оператора

Страница: 15 / 32

3. Using a pliers or adjustable wrench, thread an internal
lock washer onto each bolt (1 to 2 threads) to secure
the latch (
Figure 18 ).
11
Removing the Storage Stands
Parts needed for this procedure:
4 Lynch pin (ProCore 864)
8 Lynch pin (ProCore 1298)
Procedure
1. Raise the aerator 7.6 to 15.2 cm (3 to 6 inches) off
the ground.
2. Remove the nuts and the lock washers securing the
storage stands to the aerator (
Figure 19 ).
g007303
Figure 19
1. Storage stand 3. Nut
2. Lock washer
3. Remove the storage stands.
4. Insert the lynch pins (included in loose parts) into the
stand pins for storage (
Figure 19 ).
5. Use the storage stands whenever the aerator is removed
from the tractor.
15