Toro 46452, Руководство оператора

Страница: 10 / 36

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Keep your hands clear of the joint pivot areas
when handling the PTO driveshaft.
•
Do not step on, over, or under the PTO or
driveshafts.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and shut off the
engine of the traction unit quickly.
•
Do not use PTO spline adapters or extensions.
•
Ensure that the guards and shields are properly
installed and maintained. Replace missing,
damaged, or worn guards and shields before using
the machine.
•
Ensure that the PTO driveshaft does not contact
the drawbar.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
strike.
•
Ensure that your traction unit is suitable for use
with an implement of this weight by checking with
your traction unit supplier or manufacturer.
•
Shut off the machine, shut off the engine and
remove the key of the traction unit, and wait
for all moving parts to stop before making any
adjustments to the machine.
Understanding the Traction
Unit Controls
Familiarize yourself with the operation of the following
traction unit controls before operating the machine:
•
PTO engagement
•
3 point hitch (raise/lower)
•
Clutch
•
Throttle
•
Gear selection
•
Parking brake
Important:
Refer to the traction unit operator's
manual for operating instructions.
Practicing the Operating
Procedures
Before using the machine, find a clear area and
practice operating the traction unit with the machine
installed.
Important:
If there are sprinkler heads, electrical
or communication lines, or other obstructions
in the area being scarified or renovated, mark
these locations to ensure that these items are not
damaged during operation.
•
Operate the traction unit using the recommended
gear settings and PTO drive speeds and become
thoroughly familiar with the traction unit handling
with the attached machine.
•
Practice stopping and starting, raising the
machine, and lowering the machine, disengaging
the PTO drive, and aligning the machine with
previous passes.
Practice sessions helps you gain confidence in the
performance of the machine and helps ensure that
you are using it properly.
WARNING
Adjusting or maintaining the machine while
the traction unit is running may result in an
accident and severe injury or death.
• Lower the machine onto the ground or
jacks stands while repairing the machine.
• Before leaving the operator’s seat,
disengage the PTO drive, engage the
parking brake, shut off the engine, remove
the key, and wait for all moving parts to
stop.
• Ensure that all safety devices are secured
and in proper position before resuming
operation.
Connecting to a 3-Point
Hitch
Connecting the Lower Link Arms
1. Ensure that the attachment is positioned on a
level surface.
2. Remove the hairpin cotters from the hitch pins
(
Figure 8 ).
10