Toro 46452, Руководство оператора

Страница: 13 / 36

g347524
Figure 13
1. 76 mm (3 inches) 3. Traction-unit PTO output
shaft
2. Attachment gearbox
7. Remove and cut each section at the mark
(
Figure 14 ).
Note:
Ensure the same amount is removed
from each section.
g347473
Figure 14
1. Cut the driveshaft section.
8. Deburr the ends of the sections ( Figure 15 ).
g347459
Figure 15
9. Assemble the outer PTO driveshaft section to
the PTO shaft of the traction unit (
Figure 12 ).
10. Raise the attachment to the position where the
traction-unit PTO output shaft and gearbox input
shaft are furthest apart (
Figure 16 ).
11. Hold the driveshaft sections parallel to each
other and check to ensure that they overlap 150
mm (6 inches) or more (
Figure 16 ).
Note:
If the sections do not overlap 150 mm (6
inches), contact your authorized distributor.
13