Toro 46452, Руководство оператора

Страница: 23 / 36

Grease the machine at the following bearing locations
(
Figure 28 ).
g348515
Figure 28
Grease the PTO driveshaft at the following locations
(
Figure 29 ).
g007309
Figure 29
Checking the Gearbox
Lubrication
Service Interval: Before each use or daily—Check
the gearbox oil level.
After the first 20 hours—Check the gearbox oil
level.
After the first 20 hours—Check the gearbox for
leaks.
Every 50 hours—Check the gearbox oil level.
Every 50 hours—Check the gearbox for leaks.
Allow the gearbox to cool before checking the
lubrication.
1. Clean debris from the fill plug to avoid
contamination (
Figure 30 ).
2. Remove the fill plug to relieve trapped air.
3. Remove the socket-head bolt on the rear of the
gearbox.
4. If no fluid spills out, add more fluid until it comes
out.
5. Install the socket-head bolt on the rear of the
gearbox (
Figure 30 ).
6. Install the fill plug.
g351200
Figure 30
1. Gearbox 3. Socket-head bolt
2. Fill plug
23