Toro 46452, Руководство оператора

Страница: 14 / 36

g347621
Figure 16
1. Attachment gearbox 3. Shafts furthest apart
2. Traction-unit PTO output
shaft
12. Grease and assemble the sections.
Important:
Do not use the attachment if
the PTO driveshaft is damaged; replace the
damaged driveshaft before operation.
Installing the PTO Driveshaft
Important:
Refer to the PTO driveshaft owner’s
manual for additional operating and safety
information.
CAUTION
Operating the machine without the PTO
guards and shields may cause injury or death.
Keep all PTO guards and shields in place.
Important:
When connecting the PTO, ensure
that the attachment is not lifted higher than
necessary. Lifting the attachment too high causes
the PTO driveshaft knuckles to break (
Figure 17 ).
The PTO can operate up to an angle of 25°,
but operating it beyond 30° angle may severely
damage the shaft.
Note:
Ensure the cross bearings are aligned as
shown in Figure 23 .
g345626
Figure 17
1. Breakage occurs here.
1. Assemble the PTO driveshaft to the gearbox
input shaft of the attachment.
14