Toro 46452, Руководство оператора

Страница: 11 / 36

g347982
Figure 8
1. Hairpin cotter (3) 2. Hitch pin (3)
3. Back the traction unit squarely up to the
attachment so that you can attach the lower
connecting arms to the frame.
4. Engage the parking brake, shut off the engine,
and remove the key from the ignition. Wait for
the engine and all moving parts to stop before
leaving the operator's seat.
Note:
For maximum ground clearance, install
the hitch pins in the lower mounting holes of the
hitch plate for the attachment.
5. Insert the right and left lower link arms onto the
hitch pins (
Figure 9 ).
g347981
Figure 9
1. Lower link arm (2)
2. Hitch pin and hairpin cotter
(2)
6. Secure the lower link arms to the hitch pins
using the hairpin cotters.
Connecting the Upper Link Arm
1. Connect the upper link arm to the bracket and
secure it with the link pin and the hairpin cotter
(
Figure 10 ).
Note:
Use the slotted hole if you want the
attachment to follow the terrain during operation.
g347998
Figure 10
1. Upper link arm 4. Link pin
2. Jam nut
5. Slotted hole
3. Hairpin cotter
2. Grease the threaded steel upper link arm tubes.
3. Rotate the upper link arm to shorten the link.
Adjust it until the attachment is flat on the
ground.
11