
Figure 48
1.
Horn switch
2.
2-pin connector
Installing the Light Switch
1.
Remove the existing 8-socket connector from the old
light switch (
).
Figure 49
1.
Control-panel cover
3.
8-socket connector
2.
Old light switch
2.
Remove the old light switch from the control-panel
cover (
Note:
You no longer need the old light switch.
3.
Insert the 1 socket connector of the kit harness into
the slot number 1 of the 8-socket connector of the
main harness (
Note:
Insert the blade into slot number 1 on the
8-socket connector to ensure that the new light switch
works properly.
Figure 50
1.
Socket connector
2.
Light-switch connector
(slot number 1)
4.
Install the light-switch decal onto the control-panel
cover, centered over the light switch opening, with the
words
SONIC BOOM
toward the back of the machine
).
Figure 51
1.
Control-panel cover
3.
3-position switch (plain)
2.
Light-switch decal
4.
Back of the machine
5.
Insert the plain 3-position switch (without the
hazard symbol) into the light switch opening of the
control-panel cover with the tail of the switch rearward
(
).
6.
Connect the 8-socket connect of the machine harness
to the 3-position switch (
).
20