Toro 41250, Руководство по установке, Страница: 19 / 32

12
Installing the Light Switch and
the Horn Button
Parts needed for this procedure:
1 Horn switch
1 Button cover
1 3-position switch
1 Light-switch decal (plain)
Installing the Horn Switch
1. Remove the knob from the differential-lock rod ( Figure
45 ).
2. Remove the 4 hex-head screws (1/4 x 1/2 inch) as
shown in
Figure 45 .
Figure 45
1. Knob 2. Hex-head screw (1/4 x 1/2
inch)
3. Lift the control-panel cover and the choke control
(
Figure 46 ).
Figure 46
1. Control-panel cover 2. Choke control
4. Remove the round plug from the control-panel cover
(A of
Figure 47 ).
Figure 47
1. Panel plug (round) 4. Horn switch
2. Control-panel cover 5. Button cover
3. Jam-nut (horn switch)
5. Assemble the horn switch to the control-panel cover
with the jam nut, and tighten the jam nut by hand (B of
Figure 47 ).
6. Assemble the button cover onto the horn switch (C of
Figure 47 ).
7. Connect the 2-pin socket of the kit harness to the
2-blade connector of the horn switch (
Figure 48 ).
19