Toro 136-0372, Руководство по установке

Страница: 7 / 64

2
Disconnecting the
Pressure-Sense Tube
No Parts Required
Procedure
1. Press in the collar for the tube coupler in the end cap
of the right boom-section valve (
Figure 5 ).
Figure 5
1. Ported-cap fitting (end of
the right boom-section
valve)
3. Pressure-sense tube
2. Tube coupler
2. Pull the pressure-sense tube for the dash gauge out of
the tube coupler (
Figure 5 ).
3
Disconnecting the Wire
Harness from the Valves
No Parts Required
Procedure
1. Remove the screw that secures the 3-contact connector
of the wire harness labeled
RIGHT SPRAY VALVE
from
right spray valve ( Figure 6 ).
Figure 6
1. Right spray valve 4. Spray-valve connector
2. Center spray valve 5. 3-contact connector
3. Left spray valve 6. Screw
2. Remove the 3-contact connector of the wire harness
from the spray valve (
Figure 6 ).
3. Repeat steps 1 and 2 for the 3-contact connectors of
the wire harness labeled
CENTER SPRAY VALVE
and
LEFT SPRAY VALVE
.
4. Remove the screw that secures the 3-contact connector
of the wire harness labeled
MASTER SPRAY VALVE
from
right master spray valve ( Figure 7 ).
7