Toro 136-0372, Руководство по установке

Страница: 12 / 64

Removing the Flow Meter from the
Valve Manifolds
1. Remove the flange clamp that secures the barbed
flange fitting of the flow meter hose to the flow meter
(
Figure 16 ).
Figure 16
1. Flange clamp 4. Barbed flange fitting
(flow-meter hose)
2. Gasket 5. Adapter fitting (left
boom-section valve)
3. Flow meter
2. Remove the flange clamp that secure the flow meter
to the adapter fitting at the left boom-section valve
(
Figure 16 ).
3. Remove the flow meter and 2 gaskets from the valve
manifolds (
Figure 16 ).
Note:
Set the flow meter aside—do not remove the
electrical connector; retain the flange clamps and
gaskets for installation in
Installing the Flow Meter
(page 26) .
Removing the Bypass Hose from the
Boom-Section Valves
1. Remove the retainer that secures the 90° barbed fitting
of the bypass hose from the socket fitting of the bypass
valve at the right boom section valve (
Figure 17 ).
Figure 17
1. Bypass manifold
(boom-section valves) 3. Bypass hose
2. Retainer
2. Remove the bypass hose from the bypass valve ( Figure
17 ).
12