Toro 136-0372, Руководство по установке

Страница: 47 / 64

18
Installing the Supply Hose for
the Optional Eductor Kit
Parts needed for this procedure:
1 Eductor supply hose 2 x 88 cm (3/4 x 34-11/16 inches)
1 Retainer (small)
Procedure
1. Align the straight barbed fitting of the eductor supply
hose 2 x 88 cm (3/4 x 34-11/16 inches) with the
gasket that you removed in step
2 of Disconnecting
the Optional Eductor Kit (page 9) with the flange of
the eductor ( Figure 101 ).
Figure 101
1. Flange (eductor) 5. Eductor supply hose 2
x 88 cm (3/4 x 34-11/16
inches)
2. Gasket
6. Bottom port
(eductor-shutoff valve)
3. Flange clamp 7. 90° barbed fitting
4. Straight barbed fitting 8. Retainer (small)
2. Loosely assemble the barbed fitting to the eductor
flange with the flange clamp that you removed in step
1 of Disconnecting the Optional Eductor Kit (page 9)
3. Route the eductor supply hose to the bottom of the
eductor-shutoff valve as shown in
Figure 102 .
47