Toro 136-0372, Руководство по установке

Страница: 48 / 64

Figure 102
1. Eductor supply hose 2 x 88 cm (3/4 x 34-11/16 inches)
4. Assemble the 90° barbed fitting of the eductor supply
hose into the bottom port of the eductor-shutoff valve
(
Figure 101 ).
5. Secure the 90° barbed fitting to the port of the eductor
shutoff valve with a small retainer (
Figure 101 ).
6. Tighten the flange clamp that secures the barbed fitting
of the eductor supply hose to the flange of the eductor
(
Figure 102 ).
19
Connecting the Pressure
Sense Tube
No Parts Required
Procedure
Insert the pressure sense tube into the tube connector at the
end section valve (
Figure 103 or Figure 104 ).
Figure 103
Machines without the spray wand kit or electric hose-reel kit
1. Tube connector 3. Pressure sense tube
2. End cap (ported)
48