Toro 04861, Руководство по обслуживанию

Страница: 160 / 234

Removing the Kickstand (continued)
2. Disconnect the battery pack; refer to Disconnecting and Connecting the
Lithium Battery Pack (page 5–3) .
3. Pivot the kickstand up and hold against the frame stops.
4. Remove the bolt (item 2 in Figure 88 ) that secures the spring mount pin (10)
and torsion spring (9) to the kickstand (16).
5. Remove the spring mount pin (10) and torsion spring (9) from the kickstand
(14).
6. Remove the bolt (2), spacer (8) and nut (4) that secures the kickstand (14)
to the frame (3).
7. Remove the kickstand (14) from the frame (3).
8. If necessary, remove the spring retainer (13) by removing the nut (4), washer
(12) and bolt (11).
9. If necessary, remove the spacers (8) from the kickstand (14).
Installing the Kickstand
g337280
Figure 89
1. Kickstand (raised) 3. Kickstand (lowered)
2. Torsion spring
1. If removed, install the spacers (8) to the kickstand (14).
2. If removed, secure the spring retainer (13) to kickstand with the bolt (11),
washer (12) and nut (4).
3. Secure the kickstand (14) to the frame (3) with the torsion spring (9), spring
mount pin (10) and bolt (2).
4. Secure the kickstand (14) to the frame (3) with spacer (8), bolt (2) and nut (4).
5. Connect the battery pack; refer to Disconnecting and Connecting the Lithium
Battery Pack (page 5–3) .
Controls, Wheels, and Accessories : Service and Repairs Page 6–22 Greensmaster ® eFlex 1021
20248SL Rev C