Toro 04861, Руководство по обслуживанию

Страница: 87 / 234

Disconnecting and Connecting the Lithium Battery Pack
WARNING
Battery terminals, battery cables, or metal tools could short against
metal components causing sparks. Sparks can cause the battery
damage and high heat, resulting in personal injury.
• When removing or installing the battery, do not allow the battery
terminals or battery cables to touch any metal parts of the
machine.
• Do not allow metal tools to short between the battery terminals or
battery cables and metal parts of the machine.
• Do not attach anything to the battery terminal other than the
battery cable or wire harness connector that came with the
product.
• Do not place anything in the battery connector other than the wire
harness connector that came with the product.
• Only use the charger designed for the battery.
WARNING
Always disconnect the batteries at the battery disconnect provided
when servicing products with lithium-ion batteries. Failure to do so
may result in personal injury and property damage.
g338368
Figure 31
1. Machine connector 3. Battery connector
2. Battery pack
To prevent unexpected machine operation during service, disconnect the
machine from the battery pack as the first step in any repair (
Figure 31 ). Once
the battery pack has been disconnected, the electrical system on the machine
can be safely worked on. During repairs, ensure that you do not allow tools or
machine components to complete the battery circuit that was opened with the
cable removal.
Connect the machine wire harness to the battery pack as the last step in any
repair.
Greensmaster ® eFlex 1021 Page 5–3 Electrical System: General Information
20248SL Rev C