![Topex Bytton HSDPA Скачать руководство пользователя страница 76](http://html1.mh-extra.com/html/topex/bytton-hsdpa/bytton-hsdpa_user-manual_1128997076.webp)
TOPEX BYTTON HSDPA
User’s Manual
pag. 76
Click the “Send” button to perform the upload of the application program.
The equipment checks the image file versus its control sum, and if it is OK, it writes the application
program into the Flash memory. Besides the red indicator progress, you will see messages such as
“unlocking”, “erasing”, “writing” which show the different phases of the process of upload for the
application software.
While loading a new program image (also when committing changes or when resetting to
defaults), the Bytton equipment will cease operation for a few seconds. This means all
connections: data link, voice, LAN and WiFi will be interrupted, then will resume when BYTTON
starts again.
After the restarting of the equipment, you should go to System Status to confirm that the application
firmware has successfully loaded and is in operation:
Now you should see:
- under the TOPEX logo, the name “byttonHSDPA”;
- in the column to the left, all the items of the Menu are present (Besides LAN and System available in
kernel mode, now there are also WAN, ROUTING, SERVICES, SIM, VOICE, MISC and so on);
- information about both firmware version and kernel version;
- information about the active Internet connection (Ethernet, PPP link or PPPOE)
- Reload and Stop PPP/Start PPP buttons.