TOPEX BYTTON HSDPA
User’s Manual
pag. 51
5.5.1. Status
Shows the status of the BYTTON HSDPA system:
This page displays information about the following items:
-
Serial Number: each Bytton HSDPA from Topex has an unique identification number, such as
0707214, 0707215, etc;
-
Firmware version: version of the firmware running on BYTTON: you may see “Firmware version is
0.6.3” or “topex-1.2.3 –NETWORK-xyz-P” in the above example, and so on.
-
Kernel version. Operaing system version.
-
The frimware and operating system may be updated separately, according to the requirements of
the users. The operating system memory is write-protected, thus in case of problems, accidental
erasure or power failure during updating, you still have a functional “kernel” allowing you to load a
new software image;
-
state of the Ethernet link: up (active) or not:
- State of the Ethernet link, if used: up
(active). When using ETH for the WAN
connection, the PPP/PPPoE links will be
inactive:
−
State of the PPP data link, which uses the embedded
modem of the Bytton equipment. It may be in one of
these states: online (active), offline or stopped. Stopped
means it is Disabled, while Offline may indicate
temporary connection hang-up, but it activates when
Bytton sends/recieves data traffic. If the PPP link is
online, the IP allotted by your provider will also be
shown.
−
AND
−
State of the PPPOE data link, which uses the WAN
Ethernet port for the PPP connection.
