TOPEX BYTTON HSDPA
User’s Manual
pag. 22
From the network adapters
(network cards) of your computer, select
the one which is connected via Wifi or
Ethernet cable to the Bytton equipment.
In this example, it is the network
board type
”3Com OfficeConnect”.
Check the box “Internet Protocol
(TCP/IP) and click the button “Properties”
to configure your PC.
You may configure the connection
to Bytton HSDPA either manually or
automatically.
Automatic IP
The simplest way is to set your network adapter to get its IP address automatically from BYTTON. The
Topex HDSPA router features a DHCP server, so it can provide your PC with the correct IP address,
DNS and Gateway.
In this case, in “Internet Protocol
Properties” you should check the boxes:
- “Obtain an IP address
automatically”
- and respectively “Obtain DNS
server address automatically”.
Reset (reboot) your PC to be sure
these network settings become valid.
This way, you won’t have to worry
anymore about your settings, the Bytton 3G
equipment will take care of providing your
computer with adequate IP address and
DNS.
In the status bar at the bottom of the screen you should see the
icon of the Bytton link blinking, and a first message will show up:
“Bytton HSDPA acquiring network address” while the network
adapter gets a local IP address.
