TOPEX BYTTON HSDPA
User’s Manual
pag. 29
There are several sections (Menu items) on the configuration page of BYTTON HSDPA, allowing you to
modify the settings for:
-
HOME
:
this home page for configuration of the equipment.
-
LAN
:
settings for the wireless LAN (WiFi - embedded Access Point) and for the local wired
(Ethernet) network
-
WAN:
parameters for Ethernet, PPP including AT commands, etc and Dynamic DNS
-
ROUTING:
routing
,
NAT
(network address translation), firewall, etc.
-
SYSTEM:
Shows current status and performs operating system functions (update, change of
password, logs)
-
SERVICES:
Allows you to configure additional services (such as DDNS, NTP or webcam
-
SIM:
Shows info and change settings for the SIM card and HSDPA module, allows viewing,
sending out and receiving SMS messages
-
VOICE:
configuration of the telephony interfaces (FXO or FXS, ISDN etc)
-
MISC:
miscellaneous options for optimization (advanced settings). These are available only if
you log-in as Administrator!
Depending upon the actual firmware version running on your Bytton ISDN router, you may or may not
have access to all these configuration sections.
The Menu bar is located to the left, and features the button Commit at its bottom.
On top of the web page, after the Topex logo, you will see a “Location”
indication, which reminds you where you are on the Web interface. In
this example, the section is WAN and the subsection Settings.
Under the Location information you can see “Remote User”, which shows you the name that was used
for log-in, User or respectively Admin.
Note
:
When you change the settings in any page, don’t forget to press the “Save” button if you want to
keep these settings. Otherwise, if you click any other link, you will reach another configuration page, and
the new settings will be lost.
