Tonghui TH2683A, Руководство по эксплуатации

Страница: 14 / 62

TH2683A Operation Manual Ver.1.3
9
3) Basic Operation
3.1 <MEAS DISP>
Touch the screen or press down [MEAS] and then the <MEAS DISP> page will be displayed on the
screen shown as figure 3
‐ 1.
Figure 3 ‐ 1 Measure Display
The following functions can be achieved by touching the related key in soft key area on this page.

MEAS SETUP (entering into the measurement setup page)

SYSTEM SETUP (entering into the system setup page)

FILE SETUP (entering into the internal file setup page)

PICKOUT SETUP (entering into the pick out setup page)

START Save (the current measurement results will be saved to U ‐ disk by pressing this touch
key. If there is no U ‐ disk inserted in the interface, the measurement results will not be saved;
if there is U ‐ disk, the touch key of START Save will change into STOP Save and it will stop
saving the data into U ‐ disk by pressing the touch key of STOP Save).
NOTE: Be sure to press STOP Save to end saving after START Save. Otherwise, the data may be
lost.
The following test condition information will be displayed in measurement/condition display zone
on this page. These conditions (except the measurement internal resistance) can be set on <