TH2683A Operation Manual
Ver.1.3
19
3.3.7
Steps for OUTP RESU
Touch the corresponding zone. The following items will be displayed in the soft key zone.
LEVEL
It is used for setting the OUTP RESU as LEVEL.
PULSE
It is used for setting the OUTP RESU as PULSE.
Touch the corresponding key in soft key zone to select the relevant function.
3.3.8
PULSE WID
This function is used for setting the pulse width of pulse signal for Handler PICKOUT (
this item
can be changed when the OUTP RESU is set as PULSE
). The setting range is 1
~
25ms.
Operation Procedures One for setting the PULSE WID:
1.
Touch this key to select this option and then the color of this option will become the color of
the cursor.
2.
Touch this key (cursor) again to enter into the number soft keyboard, input the required
pulse width and then press the ENTER key to confirm and return to <PICKOUT SETUP> page.
Operation Procedures Two for setting the PULSE WID:
Touch the average zone needs to be modified on the screen and the following items will be
displayed in the soft key zone.
↑↑
（
+ +
）
Touch this key and then the instrument will increase the pulse width (set value) rapidly by 5.
↑
（
+
）
Touch this key and then the instrument will increase the pulse width (set value) by 1.
↓
（
‐
）
Touch this key and then the instrument will decrease the pulse width (set value) by 1.
↓↓
（
‐ ‐
）
Touch this key and then the instrument will decrease the pulse width (set value) rapidly by 5.
3.4
Start Test
3.4.1
Test Method
Please connect the DUT (especially the DUT with polarity, such as the capacitor) according to the
method as shown in figure 3
‐
4 before testing.
