82
2.5.10. Installing the RM-200SA on a wall
[Mounting hardware]
To mount the RM-200SA on the wall, the following parts are required.
Wall mounting bracket for the RM-210 (model WB-RM200) ...... 1 (optional)
M3.5 x 20 screw for electrical box .............................................. 2 (supplied with the WB-RM200)
4 x 25 tapping screw for wooden wall ........................................ 2 (supplied with the WB-RM200)
Step 1. Attach the WB-RM200 Wall-Mounting
Bracket on the wall.
In this case, leave the LINK cable out of the
notch in the bracket.
Note
Since there are 2 types of mounting screws
for an electrical box and for wall. Select ones
according to the mounting method.
• Install the unit only in a location that can
structurally support the weight of the
unit and the mounting bracket. Doing
otherwise may result in the unit falling
down and causing personal injury and/or
property damage.
• Be sure to use 2 screws when mounting
the bracket to the wall.
Step 2. Hook the bottom surface of the RM-200SA onto the WB-RM200.
Step 3. Plug the LINK cable into the RM-200SA's LINK terminal (RM LINK).
RM-200SA
LINK
1
2
3
Wall mounting bracket
WB-RM200 (optional)
Wall mounting screw
(supplied with the WB-RM200)
LINK cable
Notch
60.8
83.5
220.3
28
RM-200SA
WB-RM200
(optional)
[WB-RM200 mounting dimensions]
Unit: mm
WARNING
