133
4.7. Analog Link Terminal Connections
Connecting all SX-2000SM, SX-2000AI, SX-2100AI, SX-2000AO, and SX-2100AO units within the system via
Analog link terminals permits general urgency all-calls to be initiated from the RM-200SA Remote Microphone
or the RM-200SF Fireman's Microphone through the connected lines if normal broadcasts cannot be made due
to equipment failures. (See
p. 70, "CPU OFF function settings"
)
The entire system can also be reset using these connected lines. (See
,
reset enable/disable settings."
)
Make connections from the SX-2000SM's Analog link output terminal to the Analog link input terminal of the SX-
2000AI, SX-2100AI, SX-2000AO, and SX-2100AO, and from the Analog link output terminal of the SX-2000AI,
SX-2100AI, SX-2000AO, and SX-2100AO to the Analog link input terminal of the SX-2000AI, SX-2100AI, SX-
2000AO, and SX-2100AO. Both of the SX-2000SM's Analog output terminals 1 and 2 provide the same operation.
Note
Total cable length connecting analog link terminals within the system must be kept shorter than 800 m.
SX-2100AI
SX-2000AI
SX-2100AO
SX-2000AO
SX-2000SM
STP Category 5 straight cable
(with RJ45 connectors)
