TNI 20s Скачать руководство пользователя страница 7

Страница: 7 / 61

Operating Instructions TNI

20s oxy Version 2.7

Version 1.6.3 July 2010

3 Safety

(e.g. foam pad).

· Maintain a minimum distance of 80 cm to other

electrical devices.

· Maintain a minimum distance of 40 cm to the wall.

- Always check the correct connection of the connection

unit(s) to the intended gas access point(s) before switching

on the device.

Do not switch on the TNI

device before switching on the

gas inlet.

Note that the product variant TNI

20s must not be operated

with oxygen! A respective warning text (“AIR ONLY“) is

located on the back of the TNI

20s.

- Make sure that the connecting hose between the connection

and humidifier units is connected firmly and safely.

- Note that a maximum oxygen flow of 16 l/min may be set

on the oxygen flow meter.

- Oxygen supports the combustion process. Smoking and

open fires are forbidden when oxygen is introduced during

therapy. Oxygen fittings must be maintained grease-free.

3.2

General safety instructions

- US federal law restricts the herein described devices to sale

by, or on the order of, a physician.

- TNI

must not be used for the support / upkeep of acute

essential respiratory functions or for life-sustaining

interventions! The device is not suited for treating acute

failure of the respiratory system. TNI

must not be used for

invasive ventilation.

- TNI

must not be used when the upper airways are

completely closed.

Содержание 20s






























































Результаты поиска

Содержание 20s

Отзывы:

Похожие инструкции для 20s

Бренды по названию

Популярные бренды

TNI 20s, Руководство пользователя

Результаты поиска

Содержание 20s

Отзывы:

Похожие инструкции для 20s

Бренды по названию

Популярные бренды