TNI 20s Скачать руководство пользователя страница 12

Страница: 12 / 61

Operating Instructions TNI

20s oxy Version 2.7

Version 1.6.3 July 2010

3 Safety

- Upon changing patients, the TNI

device must be cleaned

and disinfected as described in Chapter 6 „Hygiene“. The

applicator must be replaced

- The applicator tube must not be obstructed or covered (e.g.

by pillows, bed covers, sheets, etc.). During therapy, place

the applicator tube on top of the bed covers.

- The patient should make sure not to lie on the applicator

tube as this will disrupt the air flow.

- If the applicator is worn and the patient repeatedly turns

in the same direction, he or she may experience pressure

sores and body constrictions. There is also the risk that the

humidifier unit can fall on the floor.

- Use only original accessories and authorized spare parts

(connection unit, hose and tube system, applicator, etc.). The

use of third party products can result in functioning failure

and health risks. Please note that the warranty and liability

expires in these cases.

- Protect the packed applicator from direct sunlight and store

in a dry place.

- The applicator is single patient use only.

- Add-on equipment connected to the analog and digital ports

of the unit must be shown to comply with their appropriate

EN specifications (e.g. EN 60950 for data-processing

devices and EN 60601 for electro-medical devices). Also, all

configurations of the valid version must comply with system

standard EN 60601-1-1. Anyone connecting additional

devices to the signal input or output component is deemed

to be a system configurator and is responsible for ensuring

that the effective version of the system standard EN 60601-

1-1 is observed and maintained. Please contact TNI medical

AG if you have any queries.

- Only authorized persons are allowed to open the device

housing of the TNI

device. Excepted are those device parts

Содержание 20s






























































Результаты поиска

Содержание 20s

Отзывы:

TNI 20s, Руководство пользователя, Страница: 12 / 61

Результаты поиска

Содержание 20s

Отзывы: