TM RACING 125 EN 2022 Скачать руководство пользователя страница 71

Страница: 71 / 130

4•71

33 33

4 • MAINTENANCE

EN - 2-STROKE

TOPPING UP BRAKE FLUID

- Remove the screws (3), cover (4), and membrane (5).

- Place the reservoir in a horizontal position and top up with DOT4 brake

fluid, up to the top limit of the inspection indicator (2).

- Re-fit the membrane, cover and screws and tighten them.

- Use water to wash away any brake fluid that overflowed or was spilled.

DANGER

- STORE BRAKE FLUID OUT OF THE REACH OF CHILDREN.

- BRAKE FLUID MAY IRRITATE SKIN. AVOID CONTACT WITH SKIN AND

EYES. IF BRAKE FLUID SPLASHES IN YOUR EYES, RINSE THOROUGHLY

WITH WATER AND SEEK MEDICAL ADVICE.

WARNING

- Prevent contact between brake fluid and painted parts. Brake fluid

corrodes paint.

- Only use clean brake fluid from a hermetically sealed container.

Содержание 125 EN 2022



































































































































Результаты поиска

Содержание 125 EN 2022

Отзывы:

Бренды по названию

Популярные бренды

TM RACING 125 EN 2022, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 125 EN 2022

Отзывы:

Бренды по названию

Популярные бренды