TM RACING 125 EN 2022, Руководство по эксплуатации и обслуживанию

Страница: 35 / 130

2•35
11
11
11
11
1
2
3
4
5 6
N
2 • CONTROL COMPONENTS
EN - 2-STROKE
GEAR SHIFTING PEDAL
The gear shifting pedal (1) is fitted on the left side of the engine.
The position of the gears is shown in the illustration.
Neutral is between first gear and second gear.
- To engage first gear, pull the clutch lever and press the gear shifting
pedal downwards.
- To engage the other gears, pull the clutch lever and push the gear shifting
pedal upwards.
KICK STARTER
The kick starter (1) is on the right side of the engine.
Once in “neutral”, rotate the pedal outwards and use your foot to start the
engine with it.
For SMR models, turn the key, as described in the relative paragraph, before
starting the engine.
For all other models, simply use the pedal to start the engine.
Starting from the highest position, push the starter all the way down with
fast, continuous movements.
Once the engine has started, fold the pedal in again.
COMBINED BRAKING PEDAL (SMR)
The brake pedal (1) is located in front of the right-hand footrest.
The basic position can be adjusted to suit the rider.
See the “Maintenance” section.
If you press the pedal (1) a combined braking, for which the system will
divide the braking, both on the front brake and on the rear one, will occur.
STEERING LOCK (EN/SMR)
The steering lock (1) is on the left-hand side of the steering head.
This device allows you to prevent rotation of the handlebar, so that the
motorcycle cannot be ridden.
- To lock the steering, turn the handlebar all the way to the right, move
the protective tab (2), insert the key, turn it to the left and press it all the
way down. Keeping it pressed down, turn it to the right and remove it.
WARNING
When you have unlocked the steering, do not leave the key in the lock. If
you steer left, the key could bend or break.