TM RACING 125 EN 2022, Руководство по эксплуатации и обслуживанию

Страница: 25 / 130

2•25
11
11
11
11
2 • CONTROL COMPONENTS
EN - 2-STROKE
ENGINE STOP BUTTON (MX / SMK)
The engine stop button (1) is located near the left-hand grip on the
handlebar.
- Press this button to switch off the engine and release it as soon as the
engine is off.
KEY IGNITION / OFF SWITCH (SMR)
SMR model have a cylinder (1) for the ignition key on the side of the
dashboard.
- To enable engine starting, put the key in the cylinder (1) and turn it
clockwise from the “ ” symbol to the “ ” symbol.
- To switch off the engine, turn the key anti-clockwise from the “
” symbol to the “ ” symbol: the position in which the key can be
removed.
COLD START DEVICE (EN - SMR)
This vehicle provides for a cold start device positioned on the throttle body.
- To activate the cold start device, pull the knob (1) externally, the knob
remains in extracted position.
- After the vehicle start, wait a few seconds until the engine speed stabi-
lizes (depending on ambient temperature), then disable the cold start
device by moving the knob (1) to its initial position.
WARNING
ONLY activate the cold start device when the engine is switched off and
cold. NEVER activate it during motion.
Use the cold start device only if necessary.
COLD START DEVICE (MX - SMK)
This vehicle provides for a cold start device positioned on the on the car-
burettor.
- To activate the cold start device, raise the knob (1), the knob remains
in raised position.
- After the vehicle start, wait a few seconds until the engine speed stabi-
lizes (depending on ambient temperature), then disable the cold start
device by moving the knob (1) to its initial position.
WARNING
ONLY activate the cold start device when the engine is switched off and
cold. NEVER activate it during motion.
Use the cold start device only if necessary.