TM RACING 125 EN 2022, Руководство по эксплуатации и обслуживанию

Страница: 52 / 130

4•52
4 • MAINTENANCE
2-STROKE - EN
125 (EN-SMR) / 144 (EN) MAINTENANCE TABLE
A CLEAN MOTORCYCLE CAN BE INSPECTED FASTER AND AT A LOWER COST
Aft
er 1 hour
Ev
er
y 15 hour
s
Ev
er
y 30 hour
s
(a
fter e
ver
y
ride)
Ev
er
y 45 hour
s
Ev
er
y 80 hour
s
Ev
er
y 95 hour
s
Ev
er
y 135 hour
s
(75 hour
s of
sports use)
Ev
er
y y
ear
Check steering bearings and play adjustment • • •
Clean and grease steering bearings and relative sealing elements •
Bleed telescopic fork • •
Clean dust seal •
Check seal and operation of fork and shock absorber •
Full fork maintenance • • •
Full shock absorber maintenance • • •
Check tightness of screws and linkage smooth running for rear suspension • •
Check frame and swing arm • •
Check swing arm bearings •
Lubricate movable parts (side stand, levers, etc.) and check their
movement
• •
Check tightness of chassis screws (fork plates, fork feet, wheel pin nuts
and screws, swing arm pin, shock absorber)
• • •
Check wear on chain, junction mesh, pinion, sprocket and guides, chain
tension
• •
Lubricate chain • •
Check fluid level in hydraulic clutch control tank • •
Change hydraulic clutch fluid •
Check brake fluid level, pad thickness, front and rear brake discs • •
Change front and rear brake fluid •
Check condition and seal of brake pipes • •
Check operation, adjustment, smoothness and play of front brake lever
and rear brake pedal
• •
Check tightness of braking system screws • •
Check wheel hubs, spoke tension and rim centering • • •
Check wheel bearing play • •
Check tire condition and pressure • • •
Check battery and charge it if necessary • •
Treat battery connections with grease for contacts (SMR) • •
Treat electrical contacts and switches with spray for contacts (SMR) • •
Check headlight orientation • • •
Check electrical system operation (low beam, high beam, stop light, turn
signals, control indicators, horn, safety button/switch)
• •
Check cooling system seal and coolant level • • •
Check condition and arrangement of rubber pipes without bends • • •
Check condition and arrangement of bleeder hoses without bends • • •
Replace silencer soundproofing material •
Check exhaust system seal and fastening • • •
Clean air filter and filter housing • •
Check condition and seal of coupler and filter housing • •
Check throttle cable play and idle speed adjustment • • •
Check condition, smoothness and arrangement without bends,
adjustment and lubrication of control cables
• •
Gearbox oil replacement
• • •