Technical Description of TANDBERG 8000 with software version E3/B8
D12008 Rev. 11
14
2.5
Stand
TANDBERG 8000 stand consists of the Base and the Monitor Rack, both with a removable rear
panel
8
.
The Natural Audio Module and the Codec are located inside the base. The Codec’s connections
are easily accessible once the front door of the Base has been opened.
To place the monitor(s) inside the Monitor Rack, the large one-piece plastic front-cover must be
opened.
The cables that need to go out from the system (e.g. ISDN cables, power cables) can be routed
through a hole at the back of the Base. To install/add cables going out of the system through this
hole, the rear panel of the Base needs to be opened.
2.6
TANDBERG Natural Audio Module (NAM II)
The NAM II is a specially designed TANDBERG audio module that provides the user with
unique audio qualities.
The Natural Audio Module II consists of the following:
Three way active speaker system with active crossover
•
2 x 130mm bass speaker elements
•
1 x 25mm tweeter
Audio amplifier
9
: 3 x 50 Watts
The Natural Audio Module is placed inside the Base of the system.
8 To remove the rear panel(s), a phillips/starshaped screwdriver is needed.
9 The Amplifier has a power selector for 230V or 115V operation which includes a fuse.
