Technical Description of TANDBERG 8000 with software version E3/B8
D12008 Rev. 11
16
4.
Codec Interfaces
Extensive use of industry standard interfaces and connectors ensure effortless integration of
external equipment with the TANDBERG 8000. These interfaces can easily be controlled via
one of the intuitive user interfaces. The TANDBERG 6000 codec is used in the TANDBERG
8000 system.
4.1
Network Interfaces and Features
Network Interfaces
1 x PRI (RJ-45 Jack) Primary Rate & Leased Line E1/T1 (G.703) Interface up to 2 Mbps
1 x PRI (RJ-45 Jack) Primary Rate (for cascading)
6 x ISDN I.420 (RJ-45 Jack) Basic Rate Interface S/T (2B+D) up to 768 kbps
1 x X.21 / V.35 / RS449 with 1 x RS366 Call Control up to 2 Mbps
1 x Ethernet (RJ-45 Jack) LAN interface (10/100 Mb) up to 3 Mbps
The TANDBERG 8000 can easily switch between the different networks ‘on-the-fly’, via the
user interface. The Codec does not need to reboot after changing the network. The supported
networks are:
•
1 PRI (RJ-45 jack) Primary rate interface & Leased Line E1/T1 (G.703) interface for
transmission speeds from 56 kbps to 2 Mbps.
•
1 PRI (RJ-45 jack) Primary rate interface for transmission speeds from 56 kbps to 2 Mbps
(for cascading to other ISDN terminals).
•
6 x BRI ISDN I.420 (RJ-45 jack) Basic rate interface S/T (2B+D) for up to 768 kbps.
•
1 x X.21 or V.35 / RS449 with RS366 call control for special applications or leased line
networks for transmission speeds up to 2 Mbps with automatic detection of bit rates.
•
1 x Ethernet (RJ-45 jack) Local Area Network interface (10/100 Mb) for transmission speeds
up to 3 Mbps.
