Technical Description of TANDBERG 8000 with software version E3/B8
D12008 Rev. 11
26
Once a detected IP address conflict has been resolved, the TANDBERG system can be
operated without reboot.
4.1.4
NET Interface
The NET interface provides several network protocols to be used with terminal adapters in
special applications. The protocols supported are:
Network protocols
•
V.35
•
RS-449
•
RS-530
•
X.21
Dialling protocols/call control
•
RS-366
•
Leased line
•
Data triggered
•
Manual mode
The above protocols are used for connection to special equipment supporting networks such as:
•
Switched 56/64 kbps
•
Leased line 56/64 kbps
•
X.21
•
Leased line (dedicated) T1/PRI
•
Circuit switched (dial up) T1/PRI
•
E1
•
T1
•
LAN
•
ATM
The different configurations are described in the document ‘Connecting external networks’
(D12096) and in special application notes available on the ‘TANDBERG Technical
documentation’ CD-ROM or by contacting your
TANDBERG representative.
A combination of External Network (V.35\RS449\RS366\X21\Leased Line T1/E1) and IP sites
is possible under the following prerequisites:
•
An External Network party must be connected first.
•
No ISDN parties can be part of the conference.
