Rev A Nov 2017
Page 18
Chapter 4
Standalone Operation
4.3.1 SETUP Menu Overview
Press the MODE button to enter the SETUP menu.
Use the OUTPUT Knob to move through the setup menu items.
diSP
- Selects the parameter to display in Monitor Mode.
GAinS
- Allows adjustment of gain values used by PID.
See Section 4.3.5.
SEnSr
- Sel ects the type of sensor connected. Se lect Ad590
when using a temperature sensor. Select either tH20 or tH200
when using a thermistor. See Section 4.3.3. for more details.
Cur L
- Selects the maximum current delivered
britE
- Adjusts the brightness of the display. Select 1 for th e
dimmest output, 16 for maximum brightness - see Section 4.3.7.
Pid
- Store or recall operating parameters. See Section 4.3.8.
An in
- Configure the control unit to use an analog input signal
to control the temperature. See Section 4.3.9. for more details.
