Rev A Nov 2017
Page 16
Chapter 4
Standalone Operation
Chapter 4 Standalone Operation
4.1 Control Panel Buttons and Indicators
Fig. 4.1 Panel Controls and Indicators
MAIN Display
- Shows the Temperature Set Point applied to the TEC element.
OUTPUT Potentiometer
- Used to the navigate the setup menus and to adjust
parameter settings.
MODE Button
- Toggles between the Setup menu (see Section 4.3.) a nd the
Monitor mode.
ENTER Button
- In Monitor mode used to enable or disable the TEC element or to
select a new desired temperature setting. In Setup mode used to select a new
menu item or parameter value.
POWER LED -
Lit when power is applied to the unit.
Note
The POWER LED will flash when the ‘Ident’ button is clicked on the Software GUI
panel - see Section 6.1. for further details.
POWER
MODE
ENTER
OUTPUT
TEC controller
