Rev A Nov 2017
Page 20
Chapter 4
Standalone Operation
4.3.3 Setting the Sensor Type"
The Temperature Controller TTC001 can be used with an AD590
temperature sensor, or either A TH20 or TH200 thermistor.
Press the Mode button to enter the Setup Menu.
Scroll using the OUTPUT Knob to select the SEnSr menu item.
Press the ENTER button to enter the Sensor menu.
Use the OUTPUT Knob to select the desired sensor type and
press Enter - see Section 4.4. for details on setting the Hi and Lo
values.
See Section 3.3.2. for information on connection.
